by admin | Oct 17, 2018 | Mould Technology Blog 1
Essentials of a well-designed gate A properly designed gate will deliver a rapid, uniform, and preferably uni-directional mold filling pattern with a proper gate freeze-off time. Gate location The gate location should be at the thickest area of the part, preferably at... by admin | Oct 17, 2018 | Mould Technology Blog 1
Design Example: Optimizing gates and ram speed profile Purpose of this example This example illustrates various aspects of the power of CAE software for the plastics industry, and how such software can be strategically applied. It shows how to put into practice many... by admin | Oct 17, 2018 | Mould Technology Blog 1
Mold cooling system overview Importance of cooling system design Mold cooling accounts for more than two-thirds of the total cycle time in the production of injection molded thermoplastic parts. Figure 1 illustrates this point. An efficient cooling circuit design... by admin | Oct 17, 2018 | Mould Technology Blog 1
Cooling-channel configuration Types of cooling channels Cooling-channel configurations can be serial or parallel. Both configurations are illustrated in Figure 1 below. FIGURE 1. Cooling-channel configurations Parallel cooling channels Parallel cooling channels are... by admin | Oct 17, 2018 | Mould Technology Blog 1
What do they do? Baffles and bubblers are sections of cooling lines that divert the coolant flow into areas that would normally lack cooling. Cooling channels are typically drilled through the mold cavity and core. The mold, however, may consist of areas too far away...
Mold Product
English 
Italian 
French 
German 
Russian 
Dutch 
Polish 
Turkish 
Arabic 
Spanish 
Japanese 
Korean 
Portuguese 
Czech 
Danish 
Finnish 
Norwegian 
Greek 
Swedish 
Hungarian 
Romanian